Audioengine B1 D/A konverter Bluetooth
- Azonosító: #271269
- Model#: B1
- Frissítve: 20 perce
- Audioengine
- Vevőegység
- Bluetooth v4.0
Nincs készleten
36 hónap jótállás
59 310 Ft
46 701 Ft + Áfa
Készletértesítő
Email értesítést küldünk ha a termék újra elérhető lesz.
Audioengine B1 D/A konverter Bluetooth termék leírása
Bluetooth 4.0 audio with aptX codec
Supported Bluetooth profiles
aptX, A2DP, and AVRCP
Inputs
Bluetooth
Outputs
Stereo analog RCA
Digital optical (SPDIF)
Required power
5V, 200mA
Operation range
up to 100ft (30m) typical
Full-scale output
2.0V RMS
Output impedance
57 Ohms
D/A converter
AKM AK4396
Power filtering
3-stage redundant regulation
SNR
SNR (DC to 20 kHz)
>100dB
THD+N
(1 kHz FS 96 kS/s) <0.02%
Frequency response
10Hz - 20kHz (+/-0.5dB)
Crosstalk
>-86dB
Input bit depth
24-bit (upsampled)
Input data rate
Determined by Bluetooth
Latency
~30 milliseconds (ms)
Product dimensions
3.5 x 4.0 x 1”
Shipping weight
1.0lbs (0.5kg)
Shipping box dimensions
11 x 7 x 3"
Environmental Requirements
Operating temperature: 32° to 105°F (0°C to 40°C)
Storage temperature: -4° to 115°F (-20°C to 46°C)
Relative humidity: 5% to 95% non-condensing
Included accessories
RCA audio cable (3ft/1m)
Power adapter with detachable cable
Microfiber bag
Setup guide
Technical Features
Supports all Bluetooth-enabled devices
High-fidelity Bluetooth® with aptX® transmission and extended range
Stream high-resolution 24-bit digital audio from the Audioengine B1 to any music system.
Includes built-in AKM4396 DAC for superior 24-bit upsampled playback
Aluminum case with audiophile-grade connectors
Analog and optical outputs
2.0Vrms maximum output level
Experience stunning audio quality with aptX® coding, built-in 24-bit upsampling DAC, and extended wireless range.
DAC Characteristics
The B1 Bluetooth Receiver utilizes the AKM AK4396A DAC, widely known for its low noise and high fidelity. B1 is essentially an upsampling 24-bit Bluetooth DAC and will pad all bit depths internally to 24-bits, thus achieving a higher signal-to-noise ratio. Due to the AK4396A's high signal-to-noise specs, the fact that digital signal is converted (upsampled) to 24-bits and the added benefit of triple redundancy power source conversion and filtering, the B1 presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.
Extended Range
Most Bluetooth implementations have very limited range, usually within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that will reach more than one room with no degradation in audio quality.
High quality Bluetooth audio
The B1 features aptX coding which is an advanced Bluetooth audio codec that provides much higher-quality sound than previous versions. The B1 is backwards-compatible with all previous Bluetooth implementations so you can wirelessly stream music from any device and still enjoy outstanding sound.
Optical Output
B1 also functions as a wireless audio bridge from your device to your favorite DAC or preamp. Use the internal DAC with RCA analog outputs or connect the optical output into another DAC.
Audioengine B1 D/A konverter Bluetooth műszaki adatai
Típus | Vevőegység |
Szabvány | Bluetooth v4.0 |
Törekszünk a weboldalon megtalálható pontos és hiteles információk közlésére. Olykor, ezek tartalmazhatnak téves információkat: a képek tájékoztató jellegűek és tartalmazhatnak tartozékokat, amelyek nem szerepelnek az alapcsomagban, egyes leírások vagy az árak előzetes értesítés nélkül megváltozhatnak a gyártók által, vagy hibákat tartalmazhatnak.
Hibát talált a leírásban vagy az adatlapon? Jelezze nekünk!
Audioengine B1 D/A konverter Bluetooth vélemények
- Minden vélemény
- Írja le véleményét!
Hatótáv is nagyon jó, szép tiszta hang; powersave mód jól működk
nincs
Kiemelkedő hi-fi hangminőség!
Csak azt tudja amit ígér. Bluetooth 5.0-t nem tud és nincs semmilyen bemenete.
Kérdések és Válaszok
Kérdése van a(z) Audioengine B1 D/A konverter Bluetooth termékről?